• Starter Kit for Raspberry Pi 3, 2 Model B/B+

  • Free Shipping ( from China ) PRODUCT ID: ADR006
  • USD



  • QTY
-+    可购数量:199
Buy It Now
Add to Cart


The Raspberry Pi Starter Learning  kit contains more than 110 components and electronic modules,these components can be divided into about 30 species.If you want to learn the basics of electronics and Linux programming, this kit is a wonderful choice for you.We have carefully prepared a guidebook(more than 60 pages guide book of PDF)and supporting experimental code routine for you to learn. The guide book includes 13 experiments,and the code is divided into two versions(C and Python).

For this kit you can get:

1. A bulk of components, electronic modules (Pi 3 is not included) that are common-used during Raspberry Pi Learning;
2. A guidebook (PDF) with circuits,code(two versions) and explanation;
3. Two versions source code of lessons(C language and Python);
4. Technical support.


About the Raspberry Pi
Raspberry Pi Pin Numbering Introduction
Raspberry Pi GPIO Library Introduction
How to use the wiringPi and the RPi.GPIO
Lesson 1 Blinking LED
Lesson 2 Buzzer
Lesson 3 Controlling an LED with a button
Lesson 4 LED Flowing Lights
Lesson 5 Breathing LED
Lesson 6 Controlling a RGB LED with PWM
Lesson 7 7-segment display
Lesson 8 How to drive a 7-segment display with 74HC595
Lesson 9 LCD1602
Lesson 10 Photoresistor
Lesson 11 Thermistor
Lesson 12 Controlling an LED through the LAN
Lesson 13 DC motor

Package List

1x DC Motor
1x L9110 motor driver
1x LCD1602
1x ADC0832
1x 74HC595
1x 7-Segment Display
1x Light Sensor (Photoresistor)
1x Analog Temperature Sensor (Thermistor)
1x 40 pin GPIO Extension Board
1x 40 pin GPIO Cable
1x Breadboard Power Supply Module
1x Active Buzzer
2x Switch
8x Red LED
4x Green LED
4x Yellow LED
4x Blue LED
16x Resistor(220Ω)
10x Resistor(1kΩ)
5x Resistor(10kΩ)
4x Capacitor (104)
2x Capacitor (10uF)
4x Button (large)
5x Button (small)
1x Button cap (red)
1x Button cap (white)
2x Button cap (blue)
2x PNP Transistor (8550)
2x NPN Transistor (8050)
2x 1N4148 Diode
2x 1N4001 Diode
1x Potentiometer (10KΩ)
1x Breadboard
30x Male to Male Jumper Wires
20x Male to Female Jumper Wires
1x Header (40pin)
1x Band Resistor Card
1x Project Box



require files for RPI Starter kit

Reply 2017-02-05 21:24:02


Hello, it has been sent to your email box, please confirm.

Reply 2017-02-07 18:05:38


I purchased this kit but lost the link to the PDF and source code. Can you please send the links to muell@marcelray.com? Thank you.

Reply 2017-02-07 02:38:25


Hello, it has been sent to your email box, please confirm.

Reply 2017-02-07 17:59:09


I purchased this kit but lost the link to the PDF and source code (problem with my mail). Can you please send the links to kika_proo@scryptmail.com? Thank you.

Reply 2017-02-25 14:58:48


It has been sent, please confirm.

Reply 2017-02-25 21:22:42


I recieved it! All perfect!!! Thanks for everything ;)

Reply 2017-02-26 01:17:18


Hi. Can someone please forward through the PDF to me as I purchased via Ebay. Thanks.

Reply 2017-03-29 23:14:35


It has been sent, please confirm

Reply 2017-03-31 11:14:00

Copyright © 2016 Adeept.com All Rights Reserved.