Understanding the code
Hello,I assembled the smart car kit a couple of days ago. Some minor issuess but I finally got it working.
I am new to arduino/electronics. I thought starting with a remote control car instead of a drone, to get the hang of it. But even this code looks rather complex. Is the code explained in detail somewhere?
Or should I have started with a less complex starter kit?
tx,
Theo Edited by mmoraes80 at 2018-9-6 12:55 AM
Hi Theo, Please takea look at this http://www.adeept.com/forum/foru ... pid=109&fromuid=276
I commented the entire code so you can understand what the code means and what it does.
Good luck and let me know you have questions.
Edited by 1501915115 at 2018-9-6 05:27 PM
{:3_52:}You can post the code you don't understand, I can explain it for you.
Ok thanks guys. I will have look. I also found some basic online manuals. Maybe I'll buy a starters kit set :) 1535826485 replied at 2018-9-9 02:04 AM
Ok thanks guys. I will have look. I also found some basic online manuals. Maybe I'll buy a starters...
Thank you
Mine gets to opening the client/py program and up comes the control panel on windows but when I enter the PicarB IP address (which I have found OK on Windows) it stalls saying cannot find Car please try later.??Puzzled at present. Using a Pi 3B on mine, all python entries up to this stage seemed to go OK, Inserted here the screen image-- server.py just flashes and does nothing as does webserver.py
Hoping for some comments from Adeept !!! I purchased the AWR-A Arduino Smart Car Kit containing the Adeept Smart Hub, the 3-Ch Tracking Module, and the 3-Ch WS2812 RGB LED.Does anyone have any sample Arduino Code (WITH COMMENTS) to demonstrate how the Tracking Module and WS2812 Module work (e.g.,to follow a line)?I don't want to use the provided wifi interface.
Pages:
[1]