Product List V3.0
Acrylic board
| |
| |
| |
A01 *1 | A02 *1
|
A03 *1 | A04 *1
|
A05 *1 | A06 *1 |
A07 *1 | A08 *2
|
A09 *1 | A10 *2 |
A11 *2 | A12 *1
|
A13 *1 | A14 *1 |
A15 *1 | A16 *1 |
A17 *1
| A18 *1
|
A19 *1 |
Components
Copper Standoff M2*6 x4 M2.5*14 x4 | Round head screw M1.6*10 x8 M2*10 x10 |
Spring Washer M4 x6 | |
Nylon isolation column 7*4*18 x2 | Flat head screw M3*10 x2
|
self-tapping screw(black) M1.7*6*6 x4
| Hex nuts M1.6 x8 M2 x23 |
Mechanical parts bearings F624ZZ x6
| Nylon column M3*30 x3 |
Transmission Parts
Bevel gear x2 | M3*3 Locking Screw x2 |
S12D4 Coupling x2 | M4*4 Locking Screw x4 |
AD002 Servo x3 | Wheel x4 |
Round rocker (white) | Aluminum alloy turntable |
D3.9L120 Axle x1 | |
Motor x1 | |
Motor wire x1 | |
Bearing 51105 x1 |
Tools
Hex Wrench-1.5mm x1 | Hex Wrench-2.0mm x1 |
Cross Screwdriver x1 | Cross Socket Wrench x1 |
Large Cross-head Screwdriver x1 | |
Winding Pipe x1 |
Electronic Component
RobotHAT driver board x 1
| Camera x 1
|
18650 battery holder x 1
| ultrasonic module x1 |
RGB LED Module x2 | 3-CH WS2812 RGB LED x4 |
3-CH Line Tracking Module x1 | Voice Module x1 |
Raspberry Pi Camera wire x1 | |
3-pin Wires-A x3 | |
3-pin Wires-B x1
| |
4-pin Wires x3 (White) | |
5-pin Wires(Tracking module wire) x1 (Red) |
You need to purchase the following components
Raspberry Pi x1 |
Raspberry Pi version compatible with the product: 3B , 3B+ , 4B. And the corresponding power cable of the Raspberry Pi version. Choose an 18650 battery that supports a maximum output current of at least 4A or choose an 18650 battery with "high rate discharge". 16GB and above SD card. |