RaspTank - AD002 servo horn/spindle does not fit
In the robotic arm assemblyThe M2.5 X 12 screw does not go far enough into the servo spindle to seat properly.
The servo horn does not seat all the way down which causes the structure to not seat properly.
Could solve this by moutning the blue shaded servo on the other side of the platic.
This still doesn't solve the screw length that is too long.
Page 115 of this guide
https://www.adeept.com/video/static1/itemsfile/RaspTankPro_tutorial_12-10.pdf
Pages:
[1]