View: 273|Reply: 0

RaspTank - AD002 servo horn/spindle does not fit

[Copy link]

4

Threads

13

Posts

44

Credits

Newbie

Rank: 1

Credits
44
Post time 2023-11-26 15:45:00 | Show all posts |Read mode
In the robotic arm assembly

The M2.5 X 12 screw does not go far enough into the servo spindle to seat properly.

The servo horn does not seat all the way down which causes the structure to not seat properly.
Could solve this by moutning the blue shaded servo on the other side of the platic.
This still doesn't solve the screw length that is too long.

Page 115 of this guide
https://www.adeept.com/video/sta ... _tutorial_12-10.pdf


Reply

Use magic Report

You have to log in before you can reply Login | Sign Up

Points Rules