View: 182|Reply: 2

Mars Rover

[Copy link]

1

Threads

3

Posts

15

Credits

Newbie

Rank: 1

Credits
15
Post time 2020-1-22 05:50:17 | Show all posts |Read mode
The sensors and camera are mounted on the front servo at the front. Anyone else finding that the smallest bump knocks the head off?
Annoying, just trying to think of a way to mount this a bit better (without using glue)

Reply

Use magic Report

3

Threads

16

Posts

91

Credits

Registered member

Rank: 2

Credits
91
Post time 2020-1-23 07:07:05 | Show all posts
Bit confused by this never had this problem it should be all attached by screws, is you use glue any movement by the camera, sensor array would be impossible
Reply

Use magic Report

1

Threads

11

Posts

35

Credits

Newbie

Rank: 1

Credits
35
Post time 2020-2-5 01:13:40 | Show all posts
it's not in the instructions, but you can secure using one of the screws like you did with the other servos. I had the same problem, it popped off, fixed it myself with the screw
Reply

Use magic Report

You have to log in before you can reply Login | Sign Up

Points Rules