View: 2856|Reply: 1

Ultimate Starter kit tutorial 10 problems.

[Copy link]

1

Threads

1

Posts

13

Credits

Newbie

Rank: 1

Credits
13
Post time 2018-12-30 22:22:50 | Show all posts |Read mode
Hi.
Total Newbie.
RaspPi 3b and Ultimate starter kit. (using GPIO extension board)
I have been going thru the tutorials. Basically wiring as instructed and then running the python script supplied on CD.
All was gong well till tutorial10.

BIT0 = 3
BIT1 = 5
BIT2 = 24
BIT3 = 26

Pins 3, 5 and 24 ARE NOT USED IN THE WIRING???
Im obviously missing something, so if someone could explain like im 5yo that would be fantastic.

When I wire it and run the code, all I get is 1 or 2 of the segments for each digit to light.
Reply

Use magic Report

23

Threads

223

Posts

814

Credits

Senior member

Rank: 4

Credits
814
Post time 2021-2-4 17:20:03 | Show all posts
Please send us a detailed description of the problem you encountered by email (including which product you bought, description of the problem, and picture provided): support@adeept.com
Reply

Use magic Report

You have to log in before you can reply Login | Sign Up

Points Rules