Hi guys just got my Rasp Tank and started to assemble it, encountered first problem, the M2.5x4+6 standoffs are too short. not enough screw thread comes through the acrylic plate to be able to screw the next standoff ontop. anyone else had this problem?
Post time 2022-11-11 10:31:36From the mobile phone|Show all posts
I did. They gave me one extra standoff. Luckily I was able to try different combinations of a screw with different standoff and I had JUST ENOUGH. I was thinking of using thread locker or glue. But you could probably sand some off the acrylic plate to gain some threads
This is a problem caused by the thickness error of some acrylics.
Temporary solution:
Use two M2.5/M3 nuts to replace the middle M2.5*4+6 copper post, and then use M2.5*14 screws to replace the M2.5*4 screws.
Or use a tool to reduce the thickness of the acrylic.
We will optimize the assembly method of this position of the product as soon as possible.
Post time 2022-9-23 01:37:16
Post time 2022-12-7 17:18:43