• Sign In or Join Free
Your position: Home > All Products

10pcs NRF24L01+ 2.4GHz Wire Less RF Transceiver Module New Compatible with Arduino

Item Code: 10xNRF24L01
Shipping Cost:
to
Delivery:
Estimated between
Units
  • Description
  • nRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band. Compatible with Arduino and Raspberry Pi.
  • Applications: wire less peripherals, remote control systems such as RC vehicles and consumer remote electronics, wire less voice transmission suchtra small: 15x29mm (including:built-in 2.4GHz antenna),for easy implementation into designs without additional hardware
  • Auto-acknowledge and auto-retransmit function
  • You can find several resources available online easily,such as tutorials, data sheets, and notes.

Specification: 
* 100% Quality Guarantee; 
* Model:NRF24L01; 
* nRF24L01 is a single chip radio transceiver for the world wide 2.4 - 2.5 GHz ISM band. 
* The transceiver consists of a fully integrated frequency synthesizer, a power amplifier, a crystal oscillator, a demodulator, modulator and Enhanced ShockBurst protocol engine. 
* Output power, frequency channels, and protocol setup are easily. 
* programmable through a SPI interface. Current consumption is very low, only 9.0mA at an output power of -6dBm and 12.3mA in RX mode. 
* Built-in Power Down and Standby modes makes power saving easily realizable. 
* Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 
* 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs. 
* Built-in hardware CRC error detection, Multipoint communication address control. 
* Low-power 1.9 ~ 3.6V, only 1uA on Power down mode. 
* Built-in 2.4Ghz antenna. 
* Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. 
* Support 6 Data channels of data reception. 
* Standard DIP Pitch Interface for embedded applications. 


You will get: 
10 pieces of NRF24L01 + 2.4GHz RF Wireless Transceiver Module 

Please Note: 
* Please check pictures for more details. 
* Transceivers integrated module , transmit or receive can not be simultaneously by one module. 
* If you have any questions during use, please feel free to contact our service personnel. We will do our best to give you a satisfactory answer.
Customer Reviews
TOP