• Sign In or Join Free
Your position: Home > All Products
Customer Reviews
Recent Reviews
  • Byshoukat hayat
  • May 14, 2019
i see a video of this  robot and now i  want  to  make a robot same like this and i want want  this robot very i see  most robot in the  world but this  is very different thanks to this robot owner it is very best  robot in thee world

  • ByEdward G Fleming
  • Aug 25, 2018
Excellent Customer Service.  I had problems getting my robot up and running, but they saw me through.  My robot is up and running and I am well pleased.  Again, Excellent Customer Service, the best I seen.

  • ByPanos Go4Game
  • Jul 06, 2018
I am from Go4Game Youtube Channel , I showcased the product in my channel.
After I built it I think that it definately worth the time I spent and I am looking forward into reviewing more Adeept products. I also have suggested the company to many of my friends who are interested in buying arduino robotics.
So I would suggest to everyone to try this opportunity.
As for the price , I believe that it is really fair because of the fact that the package contains a lot of motos, boards and in general many pieces.
On the other hand it may be a difficult project for someone to start , I would suggest starting with other Adeept Projects that may be easier in the construction !
In general the product is amazing ,I feel really happy to finish it a lot of hour of construction !!!

Thanks for the positive feedback!

By Jul 18,2018 14:38:23

Thanks for the positive feedback!

By Jul 18,2018 14:37:56

Thanks for the positive feedback.

By Jul 18,2018 14:36:56

  • Bydaren
  • Junior Member
  • Jun 09, 2018
great to build and run had some fun learning how to up load program but finely got it in the end my boys love it and look forward to buying more from here great

  • ByWorks Well
  • Jun 09, 2018
The instructions were, for the most part, clear. Two servos didn't work, but I replaced them. It works well after some adjustments to the legs. It was actually a lot of fun to build! Overall, I spent 8 to 10 hours on the project.

  • Bydfmartin@gmx.de
  • Mar 24, 2018
Servos exactly initialized according to the tutorial. Software for Hexapot and remote compiled and loaded. Conclusion: Hexapot can be controlled by remote control, but has a complete wrong Beeingometrie. Not to think about running. Obviously, several users are doing so. Do you have any advice now?

  • By32 Channel PWM Drive not working as expected
  • Jan 05, 2018
Regarding the description and wrong mounting, my description was correct in any step, but the black parts and dark blue servos give me sometimes a bad contrast, so you have to be very careful. The overview of each mounting step is a good idea to check, if you have the mounting step done well.

The Adeept 32 Channel PWM Drive V1.0 with two 18650 Lithium-Batteries (mine had ~ 8,3V full loaded) leads during the switch on to a "short cut situation" where the DC/DC converter GS2678 together PWM controller and about 6-7 attached servos came into a shortcut state (power supply voltage brakes down to ~ 2V) and do never get out! With all 19 servos attached to the "32 Channel PWM Drive" the voltage status LEDs on the board and the Arduino board reflect this by doing not light.

A possible workaround was a small circuit (resistor in parallel a p-MOS-FET and a RC) to limit the switch-on current to get the "32 Channel PWM Drive" working. I did not discover the real reason of the fault in the circuit as I have not the right equipment available, for someone without knowledge about electronics this is a no-go.

Additional the mounting of the "32 Channel PWM Drive" on the Arduino board could lead to a shortcut between some soldered pins of  "32 Channel PWM Drive" and the metal case of the RJ45 or the PINs on the other end of the Arduino board.

Finally there is still a problem with provided software also not working as shown in the video to get the hexpod moving via remote control. But this might be only a software / flashing problem I have to try again.

  • ByServo rocker arms assembly wrong in tutorial!
  • Dec 19, 2017
It seems not possible to obtain right position of arms with the tutorial assembly explanations.
I will unmount all servos (argh!) and then correct and update

  • Previous
  • 1
  • Next
  • TOP