Description

About this item

This Omni-directional Mecanum Wheels Robotic Car Kit is designed for teens to learn to coding, building and programming. It is developed based on the Raspberry Pi Pico, using MicroPython as the programming language, the code is easy to read and easy to modify, it is the best choice for learning programming and robotics.
4WD Omni-directional wheels and DC Motor robotic car uses the latest mecanum wheels for omnidirectional movement and allow your robotics to not only travel forward and backward, but also sideways and diagonally((Left/Right Parallel Shift,Forward/Backward,Upper Left/Right Diagonal shift,Lower Right/Left Diagonal Shift). Perfect for tight spaces.
Easy to Assemble and Build - Detailed tutorials(175 Pages, 21 Lesson) and complete code are provided. The download link can be found on the card in the box (Paper tutorials are NOT available as the tutorials are updated frequently).
Various Control Methods - IR Remote Control, Obstacle Avoidance, Line Tracking.
This kit comes with a ESP8266 Wi-Fi module, you can program to control this smart car by APP.

Important Tips:
This kit is loose pieces, you need to assemble it yourself.

Download Tutorials:
https://www.adeept.com/learn/detail-68.html

Lessons:
0001 Adjust the initial angle of the servo
0002 Assemble
001 About Mecanum Wheel Car
002 Introduction Raspberry Pi Pico
003 About Pico Robot Expansion Board
004 Configure Pico operating environment
01 Blink LED
02 Buzzer
03 Servo Motor
04 Measure Distance
05 WS2812 RGB LED
06 How to Control a DC Motor
07 Line Tracking
08 How to use IR receiver and IR remote
09 I2C LCD1602
10 View Raspberry Pi Pico Information
11 IR Remote Control Car
12 Obstacle Avoidance
13 Line Tracking
14 Follow
15 Comprehensive Function

Package List:
1 Set Structure Parts(Acrylic）
1x Raspberry Pi Pico
1x Pico Robot Expansion Board
1x I2C LCD1602 Display
1x Ultrasonic Module
1x 3CH Line Tracking Module
1x ESP8266(ESP-01) Module
1x IR Remote Control
4x TT Motor
4x Mecanum Wheel(2R + 2L)
1x Servo Motor
1x Battery Holder
1x Micro USB Cable
Other Necessary Accessories(Cables, Nuts, Screws, Copper Standoffs, Nylon Standoffs, Tools, etc.)

Recent Reviews

ByRichard Pierce
Junior Member
Sep 26, 2022

Was this review helpful?

(0) | (0)

Share to facebook

This is a pretty good kit. There were no problems with assembly; the instructions are very good. The remote control that comes with it is IR. It also comes with an ESP8266 that plugs in and connects to a RP2040 serial port, but there's no software support yet so you have to DIY the wireless APP remote control. I built a 3D printed magnetic stand to hold it while developing and testing software (see pictures).